** TLDR;** You can use the

`corrtable`

package (see CRAN or Github)!In most (observational) research papers you read, you will probably run into a **correlation matrix**. Often it looks something like this:

In Social Sciences, like Psychology, researchers like to denote the **statistical significance levels** of the correlation coefficients, often using asterisks (i.e., *). Then the table will look more like this:

Regardless of my personal preferences and opinions, I had to make many of these tables for the scientific (non-)publications of my Ph.D..

I remember that, when I first started using R, I found it quite difficult to generate these correlation matrices automatically.

**Yes**, there is the `cor`

function, but it does not include significance levels.

Then there the (in)famous `Hmisc`

package, with its `rcorr`

function. But this tool provides a **whole new range of issues**.

What’s this `storage.mode`

, and what are we trying to coerce again?

Soon you figure out that `Hmisc::rcorr`

only takes in matrices *(thus with only numeric values)*. **Hurray**, now you can run a correlation analysis on your *dataframe*, you think…

Yet, the output is **all but publication-ready**!

You wanted one correlation matrix, but now you have two… **Double the trouble?**

[UPDATED] To **spare future scholars the struggle** of the early day R programming, Laura Lambert and I created an R package `corrtable`

, which includes the helpful function `correlation_matrix`

.

This `correlation_matrix`

takes in a *dataframe*, selects only the numeric (and boolean/logical) columns, calculates the correlation coefficients and p-values, and outputs a **fully formatted publication-ready correlation matrix**!

You can specify **many formatting options** in `correlation_matrix`

.

For instance, you can use only 2 decimals. You can focus on the lower triangle *(as the lower and upper triangle values are identical)*. And you can drop the diagonal values:

Or maybe you are interested in a **different type of correlation coefficients**, and not so much in significance levels:

For other formatting options, do have a look at the source code on github.

Now, to make matters **even easier**, the package includes a second function (`save_correlation_matrix`

) to directly save any created correlation matrices:

Once you open your new correlation matrix file in Excel, it is **immediately ready** to be copy-pasted into Word!

If you are looking for ways to **visualize **your correlations do have a look at the packages `corrr`

, `corrplot`

, or `ppsr`

.

**I hope this package is of help to you!**

Do reach out if you get to use them in any of your research papers!

**Sign up to keep up to date on the latest R, Data Science & Tech content:**

Fantastic, finally!

THANK YOU!

LikeLiked by 1 person

Please one worked put example or vignette, thanks

LikeLike

There are examples listed in the article and in the code Duleep. They work with the datasets already included in R: iris or mtcars.

LikeLike

This is so cool! Thank you.

LikeLiked by 1 person

Great, thank you! One question, can you use this package to calculate the correlation matrix split by groups? I have some experimental results with different treatments, and I am interested in the correlation matrix by treatment.

Thanks!

Gerardo

LikeLiked by 1 person

Hi Gerardo. I am not currently in reach of a computer. Yet I think something like `lapply(split(df, group_var), correlation_matrix)` should work.

Split first splits your df into a list with seperate dfs per group on the group_var, and then lapply applies the correlation_matrix function to each list element (split df), returning seperate correlation matrices in a list. Have a look at the split and lapply base function documentation for how they precisely work.

LikeLike

Is there a problem with columns containing only one level or value such as `correlation_matrix(dplyr::mutate(mtcars, aa=0) %>% as.data.frame())`?

LikeLike

Hi Jimbou! I had accounted for error-handling in case of missing correlations (when there is no variation in one of the variables).

I have changed the code and the function can now handle such cases. The respective correlation matrix column/row will contain NaNs. Moreover, I’ve improved the function slightly to make all correlation value strings equally long.

I should really stop posting code on my website and open github repositories with change requests ; )

Thanks for noticing this error though!

LikeLike

Hey there, great work on this! I just had one issue, similar to some of your images (e.g. https://paulvanderlaken.files.wordpress.com/2020/07/image-9.png) I am having the symbols ” ” appear in all fields. Do you know what causes this or how to remove them?

LikeLike

Hi BM, could you share the exact code you used? I can’t see the exact issue based on this information.

LikeLike

I copied the provided code for the function into an r markdown sheet and used to following code to produce the correlation matrix:

correlation_matrix(mydata.BM.morning.sleep, show_significance = TRUE, digits = 2, use = “lower”, replace_diagonal = TRUE, replacement = “”)

LikeLike

I still can’t deduce the issue here. What happens if you try using the function without providing all the arguments? If you give it just your data? The data is numeric right?

LikeLike

Yeah, I’ve tried it without any arguments and it’s exactly the same. It looks like these images:

The “” don’t appear when using save_correlation_matrix though.

LikeLike

Yeah those “” are supposed to appear, as they indicate that the correlation coefficients are stored as textual (character) values in R. That is necessary as they are a combination of the numerical coefficients and the textual significance indicators (***). Once you export them to Excel, the “” dissappear as Excel does not use them to indicate that data is textual. Does this clarify your issue?

If you want to create a correlation table in R markdown without the “” you can look into further manipulating the output correlation matrix using the gt package to turn it into a pretty table.

LikeLike

Ah, yep! That completely makes sense and it’s not an issue as it doesn’t appear in the saved output. Thank you so much for coding this – it’s great!

LikeLiked by 1 person

Hi Paul, this is so great! Was searching for a easy-to-use method for this issue and this one is fantastic! Thanks a lot for this work and especially for sharing with others, this is how it works!

LikeLike

Hi, this works amazing, thank you! However, I had to tweak one little thing and let you know about it: to my understanding, the fuction does not feed “type” adequately into rcorr, which made me unable to run spearman correlations. I changed “[…] type = )” to “[…]type = type)” and then it worked. 🙂

LikeLike

A massive thank you for the function! However the save matrix function doesn’t seem to work properly… it was pasted as one single chunk without being split into separate cols, any ideas how to fix that? Thank you!

LikeLike

Hi Vi, then you probably have a different default seperator/delimiter set on your OS. You can change the inner writing function to write.csv() and I think that will fix it for you

LikeLike

Are your numeric columns typed as numeric data? If they are characters or factors, you might have some issues. I will need a reproducible error to help you further.

LikeLike

Thanx for the fast response! In my database there is a variety of character or factor variables but the majority is nummeric:

See a excerpt from a couple of numeric variables(via str(database):

$ T1_MEA_ADP_AUC : num 95 28 116 24 70 72 25 74 45 71 …

$ T1_MEA_ADP_Aggr : num 158.3 53.6 222.8 55.9 134.3 …

$ T1_MEA_ADP_Vel : num 21.3 8 23 5.9 14.1 15.3 7.1 15.5 9.6 17.8 …

$ T1_MEA_ASPI_AUC : num 18 14 15 8 23 49 34 43 6 29 …

$ T1_MEA_ASPI_Aggr : num 40.9 34.9 40.5 18.8 77.3 …

$ T1_MEA_ASPI_Vel : num 5.4 4.3 5.2 4.1 9.4 11.9 9.7 11.4 2.5 6.9 …

$ T1_MEA_TRAP_AUC : num 119 107 172 66 123 70 55 94 121 17.8 …

LikeLike

It should not drop those columns. But I can’t help you if I don’t have a reproducible example: https://www.google.com/search?q=reproducible+example

Else I can’t see what goes wrong.

LikeLike

rm(list=ls(all=TRUE))

library(data.table)

library(MBESS)

library(QuantPsyc)

library(readr)

library(lattice)

library(VIM)

library(tableone)

library(foreign)

library(gdata)

library(lattice)

library(nlme)

library(psych)

library(ggplot2)

library(car)

library(effects)

library(papeR)

library(JM)

library(lme4)

library(haven)

library(rms)

library(mice)

library(data.table)

library(lattice)

library(VIM)

library(tableone)

library(readxl)

dput(my.data3)

my.data <-dput(my.data3)

#loading correlation_matrixt script

correlation_matrix(my.data3, use ='lower', type ='spearman', show_significance = FALSE)

outcome.matrix <- Dropping non-numeric/-boolean column(s): Study_number, Incl_age, Incl_abd_surg, Incl_ascal, Excl_IC, Excl_life_exp, Excl_thromb_ther, Excl_Gibleed, Excl_plat_dis, Excl_surg_trau, Excl_Hb, Informed_consent, Sex, Family_burden_CVD, Smoking, MH_hypertension, MH_Atrium_fibrillation, MH_Cong_HF, MH_Angina_pectoris, MH_Aorta_valve_stenosis, MH_Myocardial_Infarction, MH_MI_PCI, MH_Cardiac_surgery, MH_Cardiacsurgery_specified, MH_pacemaker, MH_dyslipidemia, MH_Diabetes, MH_TIA_CVA, MH_COPD, MH_dialysis, MH_renal_insufficiency, MH_peripheral_vascular_disease, Vascsurgery, MH_PAD_surgery, NYHA_class, Rev_Cardiac_Risk_Index_surg, Rev_Cardiac_Risk_Index_isch_heart, Rev_Cardiac_Risk_Index_CHF, Rev_Cardiac_Risk_Index_CVA, Rev_Cardiac_Risk_Index_DMins, Rev_Cardiac_Risk_Index_creat, Med_aspirin, Dose_aspirin, Med_P2Y12, Med_VitK, Med_NOAC, Med_NSAID, Med_dipyridamole, Med_betablocker, Med_CA_ant, Med_ACE_inh, Med_Diuretics, Med_Digoxin, Med_Statin, Med_prednisone, T1_blood_collection_date, T1_blood_collection_time, T1_collection_mechanism, T2_blood_collection_date, T2_blood_collection_time, T2_collection_mechanism, T3_blood_collection_date, T3_blood_collection_time, T3_collection_mechanism, T4_blood_collection_date, T4_blood_collection_time, T4_collection_mechanism, T1_MEA_time, Transcombined, MI_type, FU_Other_intervention_specified, FU_infection_specified, FU_arrhythmia_specified, Outlierdeselect, filter_.

Age_inclusion Body_length Body_weight BMI_calc Alcohol Packyears MH_Avs_Grad MH_Avs_AVA MH_LVEF

Age_inclusion " 1.000" "" "" "" "" "" "" "" ""

Body_length "-0.089" " 1.000" "" "" "" "" "" "" ""

Body_weight " 0.024" " 0.400" " 1.000" "" "" "" "" "" ""

Rev_Cardiac_Risk_Index_TOTAL T1_MEA_ADP_AUC T1_MEA_ADP_Aggr T1_MEA_ADP_Vel T1_MEA_ASPI_AUC T1_MEA_ASPI_Aggr

Age_inclusion "" "" "" "" "" ""

Body_length "" "" "" "" "" ""

Body_weight "" "" "" "" "" ""

T1_MEA_ASPI_Vel T1_MEA_TRAP_AUC T1_MEA_TRAP_Aggr T1_MEA_TRAP_Vel T2_MEA_ADP_AUC T2_MEA_ADP_Aggr T2_MEA_ADP_Vel

Age_inclusion "" "" "" "" "" "" ""

Body_length "" "" "" "" "" "" ""

Body_weight "" "" "" "" "" "" ""

T2_MEA_ASPI_AUC T2_MEA_ASPI_Aggr T2_MEA_ASPI_Vel T2_MEA_TRAP_AUC T2_MEA_TRAP_Aggr T2_MEA_TRAP_Vel T3_MEA_ADP_AUC

Age_inclusion "" "" "" "" "" "" ""

Body_length "" "" "" "" "" "" ""

Body_weight "" "" "" "" "" "" ""

T3_MEA_ADP_Aggr T3_MEA_ADP_Vel T3_MEA_ASPI_AUC T3_MEA_ASPI_Aggr T3_MEA_ASPI_Vel T3_MEA_TRAP_AUC T3_MEA_TRAP_Aggr

Age_inclusion "" "" "" "" "" "" ""

Body_length "" "" "" "" "" "" ""

Body_weight "" "" "" "" "" "" ""

T3_MEA_TRAP_Vel T4_MEA_ADP_AUC T4_MEA_ADP_Aggr T4_MEA_ADP_Vel T4_MEA_ASPI_AUC T4_MEA_ASPI_Aggr T4_MEA_ASPI_Vel

Age_inclusion "" "" "" "" "" "" ""

Body_length "" "" "" "" "" "" ""

Body_weight "" "" "" "" "" "" ""

T4_MEA_TRAP_AUC T4_MEA_TRAP_Aggr T4_MEA_TRAP_Vel T1_CK_r T1_CK_k T1_CK_angle T1_CK_MA T1_CK_LY30 T1_CRT_r T1_CRT_k

Age_inclusion "" "" "" "" "" "" "" "" "" ""

Body_length "" "" "" "" "" "" "" "" "" ""

Body_weight "" "" "" "" "" "" "" "" "" ""

T1_CRT_angle T1_CRT_MA T1_CRT_LY30 T1_CRT_TEGACT T1_CKH_r T1_CKH_k T1_CKH_angle T1_CKH_MA T1_CFF_MA T1_CFF_FLEV T2_CK_r

Age_inclusion "" "" "" "" "" "" "" "" "" "" ""

Body_length "" "" "" "" "" "" "" "" "" "" ""

Body_weight "" "" "" "" "" "" "" "" "" "" ""

T2_CK_k T2_CK_angle T2_CK_MA T2_CK_LY30 T2_CRT_r T2_CRT_k T2_CRT_angle T2_CRT_MA T2_CRT_LY30 T2_CRT_TEGACT T2_CKH_r

Age_inclusion "" "" "" "" "" "" "" "" "" "" ""

Body_length "" "" "" "" "" "" "" "" "" "" ""

Body_weight "" "" "" "" "" "" "" "" "" "" ""

T2_CKH_k T2_CKH_angle T2_CKH_MA T2_CFF_MA T2_CFF_FLEV T3_CK_r T3_CK_k T3_CK_angle T3_CK_MA T3_CK_LY30 T3_CRT_r T3_CRT_k

Age_inclusion "" "" "" "" "" "" "" "" "" "" "" ""

Body_length "" "" "" "" "" "" "" "" "" "" "" ""

Body_weight "" "" "" "" "" "" "" "" "" "" "" ""

T3_CRT_angle T3_CRT_MA T3_CRT_LY30 T3_CRT_TEGACT T3_CKH_r T3_CKH_k T3_CKH_angle T3_CKH_MA T3_CFF_MA T3_CFF_FLEV T4_CK_r

Age_inclusion "" "" "" "" "" "" "" "" "" "" ""

Body_length "" "" "" "" "" "" "" "" "" "" ""

Body_weight "" "" "" "" "" "" "" "" "" "" ""

T4_CK_k T4_CK_angle T4_CK_MA T4_CK_LY30 T4_CRT_r T4_CRT_k T4_CRT_angle T4_CRT_MA T4_CRT_LY30 T4_CRT_TEGACT T4_CKH_r

Age_inclusion "" "" "" "" "" "" "" "" "" "" ""

Body_length "" "" "" "" "" "" "" "" "" "" ""

Body_weight "" "" "" "" "" "" "" "" "" "" ""

T4_CKH_k T4_CKH_angle T4_CKH_MA T4_CFF_MA T4_CFF_FLEV T1_VerifyNow_ARU T2_VerifyNow_ARU T3_VerifyNow_ARU T4_VerifyNow_ARU

Age_inclusion "" "" "" "" "" "" "" "" ""

Body_length "" "" "" "" "" "" "" "" ""

Body_weight "" "" "" "" "" "" "" "" ""

T1_Psel_TRAP T1_Psel_noTRAP T1_ratio T2_Psel_TRAP T2_Psel_noTRAP T2_ratio T3_Psel_TRAP T3_Psel_noTRAP T3_ratio

Age_inclusion "" "" "" "" "" "" "" "" ""

Body_length "" "" "" "" "" "" "" "" ""

Body_weight "" "" "" "" "" "" "" "" ""

T4_Psel_TRAP T4_Psel_noTRAP T4_ratio T1_ECG_findings T2_ECG_findings T3_ECG_findings T4_ECG_findings T1_Hemoglobin

Age_inclusion "" "" "" "" "" "" "" ""

Body_length "" "" "" "" "" "" "" ""

Body_weight "" "" "" "" "" "" "" ""

T1_Hematocrit T1_Leukocytecount T1_Monocytecount T1_Plateletcount T1_MPV T1_PDW T1_PT T1_aPTT T1_fibrinogeen

Age_inclusion "" "" "" "" "" "" "" "" ""

Body_length "" "" "" "" "" "" "" "" ""

Body_weight "" "" "" "" "" "" "" "" ""

T1_cephotest T1_hsCRP T1_hscTnT T1_Urea T1_creatinine T1_proBNP T2_Hemoglobin T2_Hematocrit T2_Leukocytecount

Age_inclusion "" "" "" "" "" "" "" "" ""

Body_length "" "" "" "" "" "" "" "" ""

Body_weight "" "" "" "" "" "" "" "" ""

T2_Monocytecount T2_Plateletcount T2_MPV T2_PDW T2_PT T2_aPTT T2_fibrinogeen T2_cephotest T2_hsCRP T2_hscTnT

Age_inclusion "" "" "" "" "" "" "" "" "" ""

Body_length "" "" "" "" "" "" "" "" "" ""

Body_weight "" "" "" "" "" "" "" "" "" ""

T2_Urea T2_creatinine T2_proBNP T3_Hemoglobin T3_Hematocrit T3_Leukocytecount T3_Monocytecount T3_Plateletcount T3_MPV

Age_inclusion "" "" "" "" "" "" "" "" ""

Body_length "" "" "" "" "" "" "" "" ""

Body_weight "" "" "" "" "" "" "" "" ""

T3_PDW T3_PT T3_aPTT T3_fibrinogeen T3_cephotest T3_hsCRP T3_hscTnT T3_Urea T3_creatinine T3_proBNP T4_Hemoglobin

Age_inclusion "" "" "" "" "" "" "" "" "" "" ""

Body_length "" "" "" "" "" "" "" "" "" "" ""

Body_weight "" "" "" "" "" "" "" "" "" "" ""

T4_Hematocrit T4_Leukocytecount T4_Monocytecount T4_Plateletcount T4_MPV T4_PDW T4_PT T4_aPTT T4_fibrinogeen

Age_inclusion "" "" "" "" "" "" "" "" ""

Body_length "" "" "" "" "" "" "" "" ""

Body_weight "" "" "" "" "" "" "" "" ""

T4_cephotest T4_hsCRP T4_hscTnT T4_Urea T4_creatinine T4_proBNP Surgery_date Surgery_duration Epidural

Age_inclusion "" "" "" "" "" "" "" "" ""

Body_length "" "" "" "" "" "" "" "" ""

Body_weight "" "" "" "" "" "" "" "" ""

Peroperative_heparin Transf_ery Transf_trombo Transf_plasma No_hypotensive_episodes Blood_loss Cell_saver FU_Postop_MI

Age_inclusion "" "" "" "" "" "" "" ""

Body_length "" "" "" "" "" "" "" ""

Body_weight "" "" "" "" "" "" "" ""

FU_CAG_or_PCI FU_Other_Intervention FU_Stroke FU_renalinsufficiency FU_infection FU_sepsis FU_arrhythmia FU_mortality

Age_inclusion "" "" "" "" "" "" "" ""

Body_length "" "" "" "" "" "" "" ""

Body_weight "" "" "" "" "" "" "" ""

Date_discharge dayshospitilization DeltatropT1 DeltatropT2 DeltatropT3 DeltatropT4 DeltatropT2T3 DeltatropT2T4 MINSdelta

Age_inclusion "" "" "" "" "" "" "" "" ""

Body_length "" "" "" "" "" "" "" "" ""

Body_weight "" "" "" "" "" "" "" "" ""

Peakdeltatrop MINSabs Deltacreat12 Deltacreat13 Deltacreat14 Smokingbinair VerifyNowcateg GFR_1 GFR_2 GFR_3

Age_inclusion "" "" "" "" "" "" "" "" "" ""

Body_length "" "" "" "" "" "" "" "" "" ""

Body_weight "" "" "" "" "" "" "" "" "" ""

GFR_4 GFRdelta11 GFRdelta12 GFRdelta13 GFRdelta14 ARUgreater550 ARUgrT1 ARUgrT2 ARUgrT3 ARUgrT4 tropbaselinehigh

Age_inclusion "" "" "" "" "" "" "" "" "" "" ""

Body_length "" "" "" "" "" "" "" "" "" "" ""

Body_weight "" "" "" "" "" "" "" "" "" "" ""

ASPI40T2 ASPI40T3 ASPI40T4 Peak_troponin Peak_Psel Corres_Peak_trombocytes Peak_trombocytes Corres_Peak_Verifynow

Age_inclusion "" "" "" "" "" "" "" ""

Body_length "" "" "" "" "" "" "" ""

Body_weight "" "" "" "" "" "" "" ""

Peak_Verifynow Corres_Peak_multiplate_ADP Peak_multiplate_ADP Corres_Peak_multiplate_TRAP Peak_Multiplate_TRAP

Age_inclusion "" "" "" "" ""

Body_length "" "" "" "" ""

Body_weight "" "" "" "" ""

Corres_Peak_multiplate_ASPI Peak_Multiplate_ASPI Corres_Peak_Fibrinogen Peak_Fibrinogen

Age_inclusion "" "" "" ""

Body_length "" "" "" ""

Body_weight "" "" "" ""

[ reached getOption("max.print") — omitted 261 rows ]

Warning message:

In sqrt(npair – 2) : NaNs produced

#The right variables seem to be dropped this time, but only few nummeric correlations appear as you can see. What might be the issue?

LikeLiked by 1 person

Dear Paul, thanx for the nice script. I am running into a problem when using your script on the database:

the script seems to drop almost all the nummeric variables(according to the str(..function) and provides the following errors:

Warning messages:

1: In sqrt(npair – 2) : NaNs produced

2: In pt(abs(h) * sqrt(npair – 2)/sqrt(pmax(1 – h * h, 0)), npair – :

NaNs produced

Do i need to prepare my database in a different way? What to do to resolve this issue?

Thanks in advance,

Regards

LikeLike

Though thisis still not a reproducible example, I can guess where it goes wrong. You are calculating spearmans correlation coefficient, which is a coefficient for ordinal variables. Your numeric variables are continuous though. Could this be the problem?

LikeLike

ah thanx! I see that the max omitted was low thus only 3 variable were shown! How do I best can see the whole matrix? Just just option(max.print=etc? Is there a better way to have an overview of the whole matrix? As still a majority of the nummerical variables are not appearing.

I do still get the warning signs:

1: In sqrt(npair – 2) : NaNs produced

2: In pt(abs(h) * sqrt(npair – 2)/sqrt(pmax(1 – h * h, 0)), npair – :

NaNs produced

LikeLike

Hi Paul, I am a newbie R user here and it looks like this is exactly what I need for my research. I just have one question (and it might be a stupid one) but how do I install the package to be able to use the script?

LikeLike

Hi Gijs, this is exactly a great question, and I see how it was not directly clear.

I did not “package” this function up unfortunately.

If you want to use this in your project, I suggest you copy all the code blocks into a new R script, which you can name “correlation.R” or something like that.

Then, in your actual script, you “source” in these correlation matrix functions using `source(“your_directory_path_here/correlation.R”)`. R then runs the script with these functions in it, and they will appear in your environment for you to use in your analysis.

Hope this helps!

LikeLike

Beautiful! Thanks you so much for the speedy reply!

LikeLike

Another question. Any idea how I can add the p-values corresponding to each *, **, ***?

LikeLike

What do you mean? The correlation_matrix function already adds those stars, I believe. You can change what significance levels and what symbols (*) are used in the code there. If you want to add textual representation of what * ** and *** are, I would do so in R markdown, or manually.

LikeLike

Ah sorry if I wasnt clear. I actually want to know what p-value corresponds to what *. I have *, ** and *** in my table but don’t know which they are. Or is it a standard? so ie: * < 0.1, **<0.05 and ***<0.01?

LikeLike

Jep, but you can double check and even change it in the code. Have a look at the correlation_matrix function.

LikeLike

Ah yes, that makes sense. Did not think to look there. Thank you so much for all your help.

LikeLiked by 1 person

Hi, how do I get an output in R without the quotation marks (“)? example below

a254 “1.000 ” “0.970 ” “-0.055” “0.973 ” “0.432 ” “-0.773” “0.704 ” “0.735 ” “-0.755” “0.738 ” “-0.749”

E2_E3 “0.970 ” “1.000 ” “-0.226” “0.986 ” “0.332 ” “-0.711” “0.534 ” “0.558 ” “-0.583” “0.771 ” “-0.624”

E4_E6 “-0.055” “-0.226” “1.000 ” “-0.136” “0.555 ” “-0.261” “0.549 ” “0.515 ” “-0.492” “0.064 ” “-0.352”

LikeLike

R needs the quotation marks to identify that the data are text strings. The data need to be text strings in order to be able to display the numbers in this specific format (3 decimals + significance signs).

There is a trick to print data without the quotation marks. You can use the cat() function. But I think you would need to write a for loop of some sort with spacing logic in order to retain the matrix table structure…

LikeLike

Hi Paul,

As a new R user this is a really useful function, thank you!

I have successfully created my correlation table, however, I am encountering an error when trying to use the save_correlation_matrix function.

I created my correlation table using the following command:

save_correlation_matrix(dum.cor.table,

filename = “Dummy data correlation table.csv”,

digits = 3,

use = “lower”)

I then tried to save the table using the following command:

save_correlation_matrix(df = dum.cor.table,

filename = “dummy-data-correlation-table.csv”,

digits = 3,

use = “lower”)

And I receive the following error:

Error in Hmisc::rcorr(x, type = type) : must have >4 observations

Any help would be greatly appreciated!

LikeLike

Hi Ben! It seems to me that one of your correlation analyses has less than 4 observations to work with. If your dataset is larger, than this is probably due to missing values in either of the respective colums. This is not something I knew would produce an error. The error does not come from my function, but from the rcorr funnction that belongs to the Hmisc package. I don’t know how to solve this except by removing one of the respective columns. Sorry 😦

LikeLike

Thanks for the great functions! Can you provide a citation so I can credit your work in a publication? Sorry if I missed this before while looking for one.

LikeLike

Hi Evan, thanks for your nice words and asking for a reference. I’d use the formats listed here: https://www.easybib.com/guides/citation-guides/how-do-i-cite-a/how-to-cite-a-blog/#:~:text=Author's%20Last%20Name%2C%20Author's%20First,section%20name%20(if%20applicable).

So something like: van der Laken, P.A. (2020, July 28). Create a publication-ready correlation matrix, with significance levels, in R. paulvanderlaken.com. https://paulvanderlaken.com/2020/07/28/publication-ready-correlation-matrix-significance-r/comment-page-1/#comment-27232

LikeLike

I really appreciate your function! I would love if you made it available as a package or on a github page so we can call it directly

Cheers!

LikeLike

Great suggestion Lucas! Let me put packaging this up on my to-do list. Don’t expect anything soon though! 😉

LikeLike

Hi Paul,

I am having some issuse with R picking up the correlation matrix function in the Hmisc package..I am using Rmarkdown

“`{r}

library(ggcorrplot)

library(dplyr)

library(Hmisc)

library(corrplot)

library(corrr)

library(tidyverse)

“`

#Data

“`{r}

my_dat<-dat[,c(6:28)]

str(my_dat)

“`

“`{r}

cor(my_dat[,c(1:23)], use="complete.obs")

“`

“`{r}

Hmisc::rcorr(as.matrix(my_dat[,1:23]))

“`

“`{r}

correlation_matrix(my_dat[,1:23], digits=2, use="lower",replace_diagonal=TRUE)

“`

Error in correlation_matrix(my_dat[, 1:23], digits = 2, use = "lower", :

could not find function "correlation_matrix"

LikeLike

Hi Wani, this function is not part of the HMisc package. You either need to run the code above, or put it in a seperate .R file and source() it in.

LikeLike

Thank you so much!! You saved me so much time and mental struggle to format the tables! Appreciate it so so much!

LikeLike

Hi, I just to here to say thank you for your job. It save me to finish my paper. You can’t image how long I Google this question … BTW, I wish you can add the usage method in post if you can, I scroll many reply to see how to use it. anyway, appreciate your jobs again!

LikeLike

And I want to ask another question: I made a csv file, and there are annoying “;” in the file, and all data were listed in one column. Here is the pic.

https://imgtu.com/i/OyCE6g

LikeLike

That’s because of the different file formats on Windows/OS & US/European computers. You can either use Excel’s TEXT TO DATA feature or its IMPORT DATA feature. You can probably find how-to’s on google!

LikeLike

Wow! Thanks a lot! I follow your method and it success! Bravo jobs!

BTW, I found the sjPlot package could also export correlation table but it just html format. You can check it out if you want.

Cheers! Best wish!

LikeLike

Hi, I am still having trouble with correlation_matrix. Sometimes it works but most times it gives an error saying ” could not find function “correlation_matrix”” when i reach that code, so i ran it in a clean r script as below and still get the error

library(ggcorrplot)

library(dplyr)

library(Hmisc)

library(corrplot)

library(corrr)

library(tidyverse)

library(readxl)

#Data

dat <- read_excel("LHISTHO20_R analysis.xlsx",

sheet = "harvest data")

dat % mutate(across(c(1:5), factor))

str(dat)

my_dat<-dat[,c(6:111)]

str(my_dat)

cor(my_dat[,c(1:106)],use="complete.obs")

Hmisc::rcorr(as.matrix(my_dat[,1:106]))

correlation_matrix(my_dat)

correlation_matrix(my_dat[,1:106],digits=2,use="lower",replace_diagonal = TRUE)

save_correlation_matrix(df=my_dat, filename="Harvest-correlation-matrix2.csv", digits=2,use="lower")

LikeLike

Hi Wani, you need to run or source the function’s code. Otherwise R does not know what correlation_matrix is. It is not a function that is included in Hmisc

LikeLike

Hi Paul,

I am sorry, I am a bit new to R so could you help me out a bit more here… what is the source code of this function? …

LikeLike

The code you see in this blog post. You need to copy it into your r script. All of it

LikeLike

You are a legend! Thanks.

LikeLike